Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
Step-by-Step Guide to Installing Solid Tires on Your Electric Scooter
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Upgrading your electric scooter with solid tires can lead to a more puncture-proof riding experience, as well as reduce the hassle of regular maintenance that comes with traditional pneumatic tires. This comprehensive guide will walk you through the process of fitting a solid tire onto your electric scooter, ensuring you can make the switch smoothly and get back on the road with confidence.
Before you begin, make sure you have the following tools at hand: a set of tire levers, soapy water or lubricant, and a heat gun or hair dryer (optional but recommended). Here are the steps to install your new solid tires:
Preparation:
Begin by turning off your scooter and ensuring it is stable. It may help to use a stand or support to keep the scooter from moving during the tire change.Removing the Old Tire:
If your scooter has a pneumatic tire, you'll need to deflate it completely before removal. Use the tire levers to pry the edges of the tire away from the rim. Work your way around the rim until the tire can be pulled free.Preparing the Solid Tire:
Solid tires can be very stiff, making them difficult to install. To make the process easier, you can heat up the tire using a heat gun or by submerging it in hot water for a few minutes. This makes the material more pliable.
Installing the Solid Tire:
Apply soapy water or a specialized lubricant around the rim of the wheel and the inside of the solid tire to help it slide into place. Starting on one side, push the edge of the solid tire onto the rim and gradually work your way around, using the tire levers to pry and tuck the tire onto the wheel. Make sure the tire is seated evenly on the rim.Final Checks:
Once the solid tire is fully installed, rotate the wheel to check for any unevenness or wobbling that could indicate an improperly seated tire. Adjust as necessary until the tire sits correctly.Reattach the Wheel:
Finally, once the tire is seated properly, reattach the wheel to your scooter according to the manufacturer's instructions.
Remember that solid tires may alter the ride feel of your scooter. Test the scooter at a low speed in a safe area to familiarize yourself with any changes in handling or performance.
Congratulations, you've successfully installed a solid tire on your electric scooter. With this upgrade, you can enjoy a more durable, flat-free riding experience on your daily commutes or adventures.
