Step by Step Guide to Assembling Your Razor Electric Scooter

If you've just purchased a brand-new Razor electric scooter, you might be wondering how to assemble it. Although the scooter comes partially assembled, putting it together can be a bit daunting if you've never done it before. Don't worry, though! We've created this straightforward step-by-step guide to help you breeze through the assembly process and get riding in no time.

Before You Start:

1. Check the Package Contents: Ensure that you have the scooter, charger, assembly tools, and the user manual.
2. Charge the Scooter: Connect the charger to the scooter and plug it into an electrical outlet. Charge the scooter for at least 12 hours before your first ride.

Step by Step Assembly:

1. Attach the Handlebars: Unfold the handlebars, slide them into the T-tube, and align the notches located on both sides. Tighten the clamp with the provided Allen wrench.
2. Insert the T-tube into the Deck: Slide the T-tube into the deck's collar, ensuring that the notches line up. Tighten the collar clamp with the Allen wrench.
3. Connect the Brake Cable: Locate the brake cable coming from the rear fender. Connect it to the brake lever on the left handlebar by sliding the cable barrel into the slot and then tightening the screw.
4. Install the Grips: Slide the rubber grips onto the handlebars and secure them with the provided screws.
5. Adjust the Brake: Test the brake by squeezing the brake lever and listening for a clicking noise. If needed, adjust the brake by loosening the rear-wheel brake pad mounting nut, pulling the brake pad up or down, and tightening the nut.

Safety Check:

1. Inspect the Scooter: Check all the connections, clamps, and screws to ensure they are tight and secure.
2. Inflate the Tires: Check the tires for proper inflation and add air if necessary, following the recommended PSI indicated on the tire sidewall.
3. Test Ride: Do a slow test ride around your neighborhood to make sure everything feels right and there are no issues before you start riding at full speed.

Enjoy Your Ride!
After following these steps, you should now have a fully assembled Razor electric scooter. Remember to always wear a helmet while riding and follow local laws and regulations. Happy scooting!