How to Start Your Hiboy S2 Electric Scooter: A Step-by-Step Guide

How to Start Your Hiboy S2 Electric Scooter: A Step-by-Step Guide

Starting your Hiboy S2 Electric Scooter is a breeze once you know the steps. Follow this guide to get moving quickly and safely. Here’s how to start your Hiboy S2 Electric Scooter:

1. Charge the Scooter

Before you can start, ensure that your Hiboy S2 is fully charged. Use the provided charger and connect it to the charging port on the scooter. A full charge is indicated by a green light on the charger.

2. Turn On the Scooter

Locate the power button on the LCD display unit on the handlebar. Press and hold the power button for about 2 seconds until the display lights up. This indicates that your scooter is turned on and ready to go.

3. Check the Display

Once the scooter is powered on, check the LCD display for battery level, speed, and mode settings such as Eco or Sport. Make sure everything looks normal and that the scooter has enough battery for your ride.

4. Unlock the Scooter

If your Hiboy S2 is equipped with an electronic lock, use the accompanying key or mobile app to unlock it. Some models may require you to enter a PIN code or use a RFID card.

5. Initial Acceleration

Stand on the scooter with one foot while keeping the other foot on the ground for stability. Push off lightly with your foot on the ground and press the throttle lever on the handlebar gently to start moving. Gradually increase the pressure on the throttle to accelerate smoothly.

6. Safety First

Before hitting the road, make sure to wear protective gear including a helmet. Always follow local traffic laws and scooter regulations to ensure a safe ride.

By following these steps, you’ll be on your way to enjoying your Hiboy S2 Electric Scooter in no time. Happy riding!