Use code SCNEWCUST15 for 15% off ALL scooters through month-end. Redeem here.
How to Properly Inflate Your Electric Scooter Tires: A Comprehensive Guide
To shop our replacement tires and learn more about the different types of tires for electric scooters, see here.
**We also have videos for replacing tires on youtube. **
Making sure your electric scooter tires have the right amount of air can dramatically improve your riding experience and prolong the life of the scooter itself. Flat tires can damage your scooter wheels and putting too much air might lead to a less comfortable and bumpier ride. In this article, we will go through a step-by-step process of how to properly inflate your electric scooter tires, ensuring a smooth and safe ride.
Determine the correct tire pressure: To find the recommended tire pressure, refer to the user manual that came with your electric scooter, or check the side of the tire where it should be indicated. Tire pressure is usually measured in PSI (pounds per square inch).
Gather the necessary tools: To inflate your electric scooter tires, you will need a tire pump and a pressure gauge. Both manual and electric air pumps can be used. However, make sure the pump is compatible with the valve type on your electric scooter tires, such as Schrader or Presta valves.
Locate the valve: Find the valve on your tire, which is usually near the edge of the wheel rim. Remove the valve cap and keep it in a safe place.
Attach the pump: Connect the tire pump to the valve. If using a manual pump, ensure the lever is down, and with an electric pump make sure it is off before connecting.
Inflate the tire: Begin pumping air into the tire, either manually or by turning on the electric pump. Check the pressure frequently using the pressure gauge to ensure you do not over-inflate the tire. Inflate the tire to the recommended PSI.
Double-check: Once your tire is properly inflated, remove the pump, and use the pressure gauge to double-check the tire pressure. If it is too high, release some air until it reaches the correct pressure.
Replace valve cap: Make sure to replace the valve cap tightly, ensuring no air will escape the tire.
Inflate the other tire: Repeat the process for the other tire, ensuring both tires have the correct pressure.
Following these simple steps will help you properly inflate your electric scooter tires, resulting in an improved riding experience, increased safety, and better overall scooter performance. Regularly checking and adjusting tire pressure is an essential part of maintaining your electric scooter for a long-lasting and fun ride.
