How to Charge a Razor E100 Electric Scooter: A Step-by-Step Guide

Charging your Razor E100 electric scooter is a straightforward process that ensures your scooter remains in optimum condition. Follow these simple steps to keep your scooter powered up and ready to go.

Step-by-Step Guide to Charging Your Razor E100 Electric Scooter

Step 1: Turn Off the Scooter

Before you begin charging, make sure the scooter is powered off. This is crucial for both safety and ensuring an efficient charge.

Step 2: Locate the Charging Port

The charging port on the Razor E100 is typically found near the scooter's base, close to the front. It's a small, round port that fits the supplied charger perfectly.

Step 3: Plug in the Charger

Insert the charger plug into the scooter's charging port. Make sure it's securely connected.

Step 4: Plug the Charger into an Electrical Outlet

Next, connect the charger’s other end to a standard electrical outlet. A red indicator light should illuminate on the charger, signaling that charging is in progress.

Step 5: Allow the Scooter to Charge

Let the scooter charge for at least 12 hours or until the charger’s indicator light turns green, indicating a full charge.

Step 6: Unplug and Store the Charger

After the scooter is fully charged, unplug the charger from the electrical outlet first, and then disconnect it from the scooter. Store the charger in a safe place for future use.

Maintenance Tips for a Longer Battery Life

• Regular Charging: Charge the scooter frequently, even if you haven't used it for a while. This helps in maintaining battery health.


• Avoid Overcharging: As soon as the indicator light turns green, unplug the charger to avoid damaging the battery.


• Store in a Cool, Dry Place: Ensure both the scooter and the charger are stored in an environment that's not too hot or cold to prolong their lifespan.

By following these steps, you can easily maintain the battery life and performance of your Razor E100 electric scooter.