How to Change the Back Tire on Your Electric Scooter: A Step-by-Step Guide

Electric scooters have quickly become a popular and convenient mode of transportation for many people. Given their increasing usage, it's essential to keep your scooter in top shape to ensure smooth rides and avoid any potential accidents. One common maintenance task that electric scooter owners face is changing the back tire. In this article, we will provide a step-by-step guide on how to change the back tire on your electric scooter.

Step 1: Gather the necessary tools
Before you start, make sure you have the following tools at hand:

• A wrench to remove the wheel bolts


• A tire lever or flat-head screwdriver to pry the tire off the rim


• A new tire and/or inner tube (depending on what needs to be replaced)


• A bike pump to inflate the new tire

Step 2: Turn off your scooter and lay it down on its side
Ensure the scooter is turned off before starting the tire changing process. Lay the scooter down on its side with the rear wheel facing up, providing easy access to the wheel.

Step 3: Remove the wheel bolts and the wheel
Using the wrench, remove the nuts and washers from the wheel bolts. Once the nuts and washers are off, carefully remove the wheel from the scooter.

Step 4: Deflate the tire
Before attempting to remove the tire, deflate it completely by pressing down on the valve. This will make it easier to work with.

Step 5: Pry the tire off the rim
Using the tire lever or flat-head screwdriver, carefully insert it between the tire and rim, prying the tire away from the rim. Work your way around the tire until it is completely detached from the rim. If you are only changing the inner tube, remove the damaged tube at this point.

Step 6: Install the new tire or inner tube
If you are replacing the entire tire, simply place the new tire onto the rim, making sure it is aligned correctly. If you are replacing just the inner tube, insert the new tube into the tire, lining up the valve with the hole in the rim.

Step 7: Inflate the tire
Using the bike pump, inflate the new tire to the recommended pressure. This information can usually be found on the tire's sidewall or in the scooter's user manual.

Step 8: Reattach the wheel to the scooter
Place the wheel back onto the scooter, ensuring the bolts line up with the holes in the wheel. Reinstall the washers and nuts, tightening them securely with the wrench.

Step 9: Check the tire pressure and alignment
Before you head out on your newly changed tire, double-check the tire pressure and ensure that the wheel is properly aligned and securely attached.

Congratulations, you have successfully changed the back tire on your electric scooter! Regular inspections and maintenance can keep your scooter performing at its best and prevent potential issues down the road.