How to Change a Tyre on an Electric Scooter: A Step-by-Step Guide

Changing a tyre on an electric scooter can seem daunting, but with the right tools and steps, it’s a manageable task. Follow this comprehensive guide to get back on the road in no time. Here’s how to do it:

Tools You’ll Need

• Replacement tyre


• Screwdriver set


• Wrench or pliers


• Tyre levers


• Air pump

Step-by-Step Instructions

1. Turn Off the Scooter

First, ensure your electric scooter is turned off. This will prevent any accidental movements or electrical issues.

2. Remove the Wheel

Use your screwdriver set and wrench to loosen and remove the bolts or screws that hold the wheel in place. Carefully detach the wheel from the scooter.

3. Deflate the Tyre

Release any remaining air from the tyre by pressing down on the valve stem. This step makes it easier to remove the tyre from the wheel.

4. Remove the Old Tyre

Use tyre levers to pry the old tyre away from the wheel. Work your way around the tyre, lifting it off the rim.

5. Install the New Tyre

Position the new tyre on the rim, ensuring it is properly aligned. Use the tyre levers to secure the tyre onto the wheel. Be cautious not to pinch the inner tube.

6. Inflate the New Tyre

With your air pump, inflate the new tyre to the recommended pressure. Check the tyre’s sidewall for the correct PSI rating.

7. Reattach the Wheel

Align the wheel with the scooter’s frame, then reinsert and tighten the bolts or screws securely.

8. Test the Scooter

Turn on your electric scooter and take it for a short test ride to ensure everything is functioning correctly.

Following these steps will make changing a tyre on your electric scooter a straightforward process. Safe riding!